Loading...
Serving Merritt Island, FL and surrounding areas. (321) 358-0047
Sandy soil and daily summer storms make a poorly built patio a short-term investment. We build to last - solid base, proper drainage, full permits.
Sandy soil and daily summer storms make a poorly built patio a short-term investment. We build to last - solid base, proper drainage, full permits.
Concrete patio construction in Merritt Island means excavating the area, compacting a gravel base, forming the edges, and pouring a four-to-six-inch slab that hardens into a permanent outdoor surface - most residential patios take one to three days of active work, then a week of curing before you put furniture on it.
Many Merritt Island homeowners come to us because their backyard has no usable surface - just grass, dirt, or an older slab that has started to crack and shift. Without something solid underfoot, the rainy season makes the backyard unusable for days at a time. A concrete patio solves that by giving you a level, dry surface that sheds water instead of absorbing it. If you want to go further with the look, a stamped concrete finish can make a plain slab look like stone or brick at a fraction of the cost of real pavers.
The base preparation matters most. Merritt Island's sandy, low-lying soil does not naturally support a concrete slab. A patio poured directly on loose sand without a properly compacted layer underneath will settle and crack within a few years. Getting the base right is the single most important thing we do on every job.
Merritt Island gets over 50 inches of rain per year, with afternoon thunderstorms almost daily from June through September. If your backyard turns into a muddy mess after every storm, a properly sloped concrete patio redirects water away from your home and gives you a dry, usable surface even during wet months.
If your older slab has started to crack, sink on one side, or develop trip hazards, it is often more cost-effective to remove it and pour a new one than to keep patching. In Merritt Island's sandy soil, older slabs built without a proper base settle unevenly over time. A noticeable dip when you walk across is a sign the base has shifted.
If your backyard is just grass or dirt and you avoid it because there is nowhere to sit or entertain, a concrete patio is the most durable and low-maintenance solution in Florida's climate. Unlike wood decks, concrete does not rot, warp, or need annual staining in the humidity.
If water collects right next to your house after rain - especially along the back wall - that is a drainage problem that can eventually damage your foundation. A concrete patio with the correct drainage slope directs water away from the structure. This is especially relevant for Merritt Island homes on low-lying lots.
Every patio project starts with a free site visit where we measure your space, check access to the backyard, assess the soil, and give you a written quote that includes excavation, base prep, forming, the pour, finishing, and permit fees. We do not start until you have signed off on every detail - so there are no surprises when the invoice arrives. For homeowners who want a clean, simple surface, a standard broom-finish or trowel-finish patio is the most practical option and holds up well through Florida's seasons. For homeowners who want to create an outdoor living space that doubles as a gathering area, we also offer concrete pool deck installation, which uses many of the same techniques on a larger scale.
Whether you want a modest dining area, a large entertaining surface, or a patio designed to accommodate a future screen enclosure, we size and build to your specific needs - not a one-size template. If you are planning a covered lanai later, tell us now: we can pour the slab with the right thickness and prepare for the post footings before the concrete goes down.
Best for homeowners who want a clean, functional surface at a straightforward price.
A smooth, polished surface suited for covered lanais and screened-in areas.
Decorative patterns stamped into the surface to mimic stone, brick, or wood grain.
Integral color or acid stain applied after the pour to add visual interest without pavers.
Oversized pours for homeowners who need space for outdoor kitchens, dining, and lounging.
Poured with the correct thickness and post-footing placement for a future screen enclosure.
Merritt Island sits on a barrier island surrounded by the Indian River and Banana River, with much of the residential land at low elevation and sandy composition. A patio poured on this kind of soil without a properly compacted gravel base underneath will crack and tilt faster than it would on denser, more stable ground. Add intense summer heat that can cause concrete to flash-set on the surface before it has fully hardened underneath, and you have a job that rewards contractors who have done it here before - not just anywhere. Homeowners across Merritt Island and Cocoa Beach deal with the same soil and weather conditions, and we build for both.
Brevard County requires a permit for most patio projects since Merritt Island is an unincorporated area governed by the county. Many neighborhoods here also have HOA rules about patio size, finish color, and setbacks - a complication that surprises first-time patio buyers who do not check before signing a contract. We are familiar with both the county permit process and the common HOA requirements in this area. If your neighborhood has an architectural review board, we can help you understand what to submit so the project stays on track.
We respond within one business day. We will ask about the size of the space you have in mind, whether you want a decorative finish, and whether there are any access challenges - like a narrow gate. We schedule a free on-site visit to measure and quote properly.
We come to your property, check access, assess the soil, and measure the area. You get a written quote covering excavation, base prep, forming, the pour, finishing, and permit fees. We do not give over-the-phone prices that change when we show up.
For most patio projects in Brevard County, we apply for a building permit before any work begins. The process typically takes a few business days. We manage the paperwork - you do not need to visit any office - and we will confirm the permit number before the pour date.
Day one is excavation and base preparation - the foundation of a long-lasting patio. The pour usually happens the next day, early in the morning to manage Florida's heat. After curing, a county inspector signs off on the permit. We walk you through the finished patio before we leave.
We will measure your space, walk you through finish options, and give you a written quote with no obligation. Spring books up fast before the rainy season - reach out now to hold your spot.
(321) 358-0047Low-lying, sandy soil is the number one reason patios on Merritt Island crack and shift early. We compact a proper base layer before every pour - the step most low-bid contractors skip. It is what separates a patio that looks the same in 10 years from one that starts settling in two.
Every patio we build is graded with a slight slope so rainwater runs toward the yard, not toward your back door or foundation. In a place that gets over 50 inches of rain a year, that slope is what makes your patio usable the same evening as a storm instead of days after.
Unpermitted patio work is one of the most common problems homeowners discover during a home sale - and fixing it after the fact is expensive. We handle the permit application, manage the county inspection, and give you the documentation so everything is on record as done correctly. Check permit requirements at Brevard County Building Services.
We give you a written quote covering size, finish, base prep, and permit costs before we pick up a shovel. No open-ended estimates that grow on the invoice. The Concrete Network recommends getting a detailed written scope from any contractor before signing - we make that easy.
The combination of correct base prep, proper drainage, full permits, and a transparent quote is what gives homeowners confidence that the patio they are paying for today will still look right years down the road - not just on the day of the inspection.
Transform a plain concrete surface into a decorative finish that mimics stone, brick, or wood - ideal for patios and outdoor entertaining areas.
Learn MoreA slip-resistant, heat-reflective concrete surface around your pool that holds up to Florida sun, salt, and foot traffic.
Learn MoreSpring is the best window for a Florida concrete pour - cooler temps and lower humidity mean a cleaner cure. Call now or send a message and we will get back to you within one business day.