
Cracked, tilting, or slippery steps are a hazard and an eyesore. We build solid concrete entry steps on a properly compacted base, with the permits and slip-resistant finishes your home needs.
Cracked, tilting, or slippery steps are a hazard and an eyesore. We build solid concrete entry steps on a properly compacted base, with the permits and slip-resistant finishes your home needs.

Concrete steps construction in Merritt Island means building a wooden form in the shape of your staircase, pouring concrete into it, and finishing the surface - most residential jobs take one to two days of active work, then 24 to 48 hours before you can walk on the steps and about a week before they reach full working strength.
A lot of Merritt Island homes were built during the space boom years of the 1960s through the 1980s, and entry steps from that era are often 40 to 60 years old. They may still look acceptable from a distance while cracking, settling, or separating from the house where no one notices. That is when the trip hazard risk starts - and when Brevard County will flag unpermitted or substandard work if you sell your home. If you are also considering adding a concrete retaining wall near your entry to manage grade changes, both projects can be built together for better scheduling and site efficiency.
What goes under the concrete matters as much as the pour itself. The base preparation - compacting the soil, adding a gravel layer, getting the slope right - is what keeps new steps from cracking or tilting in Merritt Island's sandy, shifting soil.
Cracks that run all the way through a step, have edges sitting at different heights, or keep reopening after patching are a sign the concrete has started to fail structurally. In Merritt Island's humid, salty environment, water gets into those cracks and makes them wider over time. Small surface cracks can sometimes be repaired, but through-cracks usually mean replacement is the smarter investment.
If a step shifts when you put weight on it, or the whole staircase looks like it is leaning away from the house, the base underneath has settled or eroded. This is especially common on Merritt Island's sandy soil, where the ground beneath steps can compact unevenly over the years. A tilted step is also a trip hazard - worth getting looked at before someone gets hurt.
When the top layer of concrete starts to flake off in chips or the surface feels crumbly rather than solid, that is called spalling - and it means the concrete has been compromised by moisture or age. In Merritt Island, salt air speeds this up on steps that have not been sealed. Once spalling starts, it tends to spread, and patching is usually a short-term fix.
If there is a noticeable drop between the top step and your door threshold - meaning you have to step up or down awkwardly to enter - the steps have settled away from the house. This is both a safety issue and a sign that the foundation of the steps has shifted. It is worth having a contractor assess whether the gap is cosmetic or a sign of deeper movement below.
Every steps project starts with an on-site visit. We look at your existing steps, check the soil and drainage below, and give you a written estimate that includes demolition and haul-away, base preparation, formwork, the pour, surface finishing, and Brevard County permit fees - nothing hidden. For homeowners who want a clean, durable entry at a practical price, a broom-finished concrete staircase is the standard choice and holds up well in Merritt Island's rain and salt air. For homeowners who want to match a decorative exterior, we also offer stamped and colored finishes with non-slip additives built into the sealer. And if your project also calls for a concrete slab at the base of the steps or a landing pad, we can pour both at once.
We handle the Brevard County permit from application through the final inspection. You do not have to coordinate with the county - we do it. Every project gets a written quote before any work begins, so you know exactly what you are approving before anyone picks up a shovel.
Best for homes adding a front or rear entry where no steps exist, or replacing a set that has failed.
Tear-out of old steps and complete rebuild, including base compaction and new form work.
The practical standard for entry steps - textured for grip in wet weather without adding cost.
For homeowners who want the steps to match a decorative exterior or front entrance design.
A poured concrete landing at the base of the steps for a clean, level transition to the walkway.
For steps where water currently pools at the base or drains toward the house - we regrade as part of the build.
Merritt Island is surrounded by the Indian River Lagoon and the Banana River, which means the air carries salt moisture year-round - not just on stormy days. That salt air slowly eats into unprotected concrete surfaces, causing pitting and surface erosion faster than you would see anywhere inland. For entry steps, which get walked on daily, that surface wear matters. A sealer rated for coastal exposure is not an optional upsell here - it is a genuine maintenance need if you want the steps to last 30 or more years. The rainy season from June through September adds another layer of local complexity: afternoon thunderstorms can interrupt a pour or damage fresh concrete if the schedule is not managed well. We serve homeowners in Titusville and Rockledge as well, and we plan every pour around the weather forecast and early morning scheduling to keep the job on track.
Sandy soil beneath the steps is another Merritt Island factor worth understanding. The low-bearing soil here can shift and compact unevenly, especially near the water. Steps built without proper base compaction and a stable gravel layer underneath can crack or tilt within a few years - sometimes sooner. We account for soil conditions on every job, not just when a customer asks about it.
Tell us about your entry - which door, how many steps, and whether you have existing steps or are starting fresh. We reply within one business day to schedule an on-site visit. We do not quote over the phone for jobs we have not seen.
We come out to measure, check the soil and drainage, and look at the condition of anything that needs to be removed. You get a written estimate covering demo, base prep, forming, the pour, finish, and permit fees - everything, so you can compare it to other quotes with confidence.
We apply for the Brevard County permit before work begins. Once approved, we clear the area, break out and haul away any old concrete, compact the base, and add a gravel layer. This prep work is what keeps your new steps from cracking or settling - it is not a step we skip.
We build the form, pour the concrete, and apply the surface finish in one work session. After 24 to 48 hours the steps are walkable, and after about a week they reach full strength. A Brevard County inspector will check the finished work, and we coordinate that visit - you do not need to be involved. We walk you through the finished steps before we leave.
Free written estimate. No obligation. We handle all Brevard County permits and reply within one business day.
(321) 358-0047Merritt Island's sandy, low-bearing soil is unforgiving for concrete that is not properly supported. We compact the base and add a stable gravel layer before every pour. That groundwork is what keeps steps level and crack-free after a few rainy seasons - and it is the detail most often skipped on jobs that fail early.
Brevard County requires a permit for concrete steps attached to or adjacent to a home's structure. We handle the application and coordinate the inspection through Brevard County Building Services. The finished work is on record, which matters if you ever sell your home or need to file an insurance claim.
We apply sealers rated for salt air and UV exposure as a standard part of every steps project - not as an add-on. In Merritt Island's coastal environment, a sealer is what separates steps that look good five years later from ones that start pitting and flaking well before that.
Every quote covers demolition, hauling, base prep, formwork, the pour, surface finishing, and permit fees in line items - not as a single number you cannot verify. You know what you are approving before anyone picks up a shovel. The Florida Concrete and Products Association supports the kind of transparent, standards-based work we do: see{' '}fcpa.org for industry standards.
When all of these details come together - proper base, the right finish for Florida's climate, permits handled correctly - you get steps that look good and stay safe for decades. That is the standard we hold every project to.
Concrete steps construction standards are guided by the Portland Cement Association. Permit requirements for Brevard County residential structures are administered by Brevard County Building Services. Florida contractor licensing is verified through the Florida Department of Business and Professional Regulation.
If your steps project involves a new entry slab or a foundation connection, we build concrete slabs as part of the same scope.
Learn MoreManage grade changes near your entry or yard with a poured concrete retaining wall built to hold Merritt Island's sandy soil in place.
Learn MoreFall is the best season for concrete work here - reach out now before the schedule fills and get a free written quote.